Timber Ridge Designs
Party-Template-690x240.jpg
THE RUSTIC LIGHT FIXTURES DIY PROJECT MATERIALS AND TOOLS LIST

There are a few things that you’ll need in order to do this project.
And wherever possible, I’ve tried to include links to where you can buy them online in order to save you some time.

Oh, and some of the links might be affiliate links so if you buy through them I might earn a small commission.
It doesn’t cost you any more but it helps but a few more cents towards our next DIY project.

So without further ado, here’s the list:

• Jigsaw – This is a crucial tool on this project. If you don’t have one, you won’t be able to follow along. I recommend using a cordless one. Otherwise you can end up stepping on the cord as you’re cutting and it can ruin your cut.

• Jigsaw Blades. I could’ve left this one out, but having dull jigsaw blades is terrible. I like this set that comes with a hard case. That way I can just throw the whole case in my bag and it’s all there.

• Plywood. For this project, we used basic 3/4″ plywood. Nothing fancy there.

• Wood stain. I recommend picking up at least 2-3 small tins of different stain colors for your project. You’ll want to do some samples before coating your final project.

• Glue. You can use regular old wood glue if you want. But for me, I always use InstantBond. The stuff is freakishly strong and bonds within a couple seconds. I couldn’t believe how fast it cured once sprayed with the activator. One time when making cabinets (see this post here), I accidentally place a piece of trim in the wrong spot. Well, in trying to pry the two pieces of wood apart I ended up de-laminating the plywood. The stuff just wouldn’t let go.

• Table Saw. You might be able to get away with just using the jigsaw. But it will make things a bit easier when you go to rip an angled cut on the curved sections of the chandelier.

• Drywall mud or spackle. We used this to add a bit of a shmear look to ours. But you can leave this off if you’d rather just paint or stain it.

• Router. You’ll need either a hand-held router or a router table. Using a router table will make your life easier. But you can do it with a hand-held if you need to. I find a router table makes your life a lot easier. You don’t need it for every DIY project you do. But when you need it, it sure makes life a lot easier.

• Double sided tape. You’ll use this to fasten your template to the wood parts you’re cutting. More on this later.
That’s about it. Other than that we’re ready to get started and design your lamp.

Maecenas aliquet accumsan

Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos hymenaeos. Etiam dictum tincidunt diam. Aliquam id dolor. Suspendisse sagittis ultrices augue. Maecenas fermentum, sem in pharetra pellentesque, velit turpis volutpat ante, in pharetra metus odio a lectus. Maecenas aliquet
Name
Email
Comment
Or visit this link or this one